|
|
Tile Care and Natural Stone Maintenance - products at Tile Stone Solutions
We have the very best in tile care and natural stone maintenance products . These products are water based making them easy and safe to use. We have grout colourants, tile cleaners, sealers, scrubbing compounds and emulsifying pads. Not sure which is the correct product? Call us for advice on 01782 566166 and speak to a technical advisor. All products are stocked at our warehouse and are shipped on next-day delivery to your door.
Knockdown is a non-acidic honing powder that removes scratches, moderate acid etching and wear patterns and produces an even, flat honed finish. Uses: Recommended for use on limestone, travertine, marble and terrazzo. Coverage: Approximately 100 to 200 sq. ft. per pound depending on hardness of the stone and method of application.
(1 unit: 0.907Kg tub)
|
|
|
|
Revolutionary new no-sheen, penetrating sealer, formulated to darken, enrich and highlight the character and beauty of unsealed natural stone. It rejuvenates the colour and improves the appearance of weathered stone. May also be used a pre-grout sealer, allows water-vapour transmission, for use inside and out. Can last up to 15 years.
Approximate Coverage:13 to 36 m2 per litre, per coat
(1 unit= 1 bottle of 946mL)
|
|
|
|
Clear, durable floor finish that resists surface abuse when properly maintained and leaves a beautiful high-sheen finish. May also be used a minimum of 2 hours prior to grouting for pre-grouting protection on unglazed porcelain tile. Allows moisture vapor transmission.Interior only.
Approximate Coverage:19 to 25 m2 per litre, per coat
|
|
|
|
|
Premium, no-sheen, natural-look, water-based penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas.May also be used as a pre-grouting sealer over clean tile surfaces. Allows moisture vapor transmission so is excellent for both interior and exterior situations. It is also an excellent grout sealer and can last up to 15 years.
Approximate Coverage:8 to 36 m2 per litre, per coat
Choose quantity below:
|
|
|
|
Natural-look, below-surface sealer designed to resist stains. May also be used as a pre-grouting sealer over clean tile surfaces.Breathable formula allows moisture vapor transmission, can be used in bith internal and external situations.Lasts up to 5 years.
Approximate Coverage:8 to 25 m2 per litre, per coat.
(1 unit = bottle of 946mL)
|
|
|
|
Non-flammable, multi-purpose stripper formulated with a long dwell-time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also draws out deep-set stains and removes heavy grease buildup.
Approximate Coverage:2 to 5 m2 per litre
|
|
|
|
A premium, no-sheen sealer that provides maximum stain protection, especially in food preparation and serving areas. This product allows moisture vapor transmission and is designed for use on all natural stone, porcelain, quarry, saltillo, terra cotta, masonry surfaces, and other porous tile and grout where a natural look is desired. Ultra-Solv is also an effective pre-grouting sealer.
(1 unit = 473mL bottle)
|
|
|
|
AQUA MIX NANOSCRUBTM is an abrasive cream cleaner designed to work where other cleaners won`t. It utilizes NanoSTTM (nano-sized particles) to penetrate below tough stains, dissolve and lift them out. Especially effective for cleaning rough or textured surfaces. Also removes factory applied waxes and floor finishes, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground-in dirt and most sealer residues. NanoScrub is non-toxic, non-flammable and non-acidic.
946ml = 1 unit
Coverage 19m2 - 200m2 per gallon
|
|
|
|
|
|
|
|
|
